Avery Dennison ADTP1 300dpi Printhead

Avery Dennison ADTP1 300dpi Printhead Price In Bangladesh

The Avery Dennison ADTP1 300 dpi printhead is the factory‑specified, OEM replacement imaging module for the Avery Dennison Monarch® ADTP™1 tabletop printer family. Rated at 300 dpi (12 dots mm) and a maximum print width of 4.09 in / 104 mm, this thermal printhead produces razor‑sharp barcodes, text, and graphics while maintaining the speed, durability, and RFID readiness that have made the ADTP series a supply‑chain favourite.

If your warehouse, distribution centre, or retail back‑room relies on an ADTP1 printer, sustained imaging quality is mission‑critical. Over time—particularly in high‑volume environments printing at up to 12 ips (304 mm s)—even the sturdiest printheads can accumulate microscopic abrasions, ribbon residue, and dust. Lines may fade or dropout, human‑readable text can blur, and RFID verification errors may spike. Rather than scrap an otherwise healthy printer, installing the genuine ADTP1 300 dpi printhead restores factory‑new output at a fraction of the cost of a replacement unit.

Because Avery Dennison designs its printheads and firmware in tandem, you retain full support for both direct‑thermal and thermal‑transfer modes. Operators can continue using standard Monarch ribbons up to 600 m (23,622 in) on a 1‑inch plastic core without any profile changes after the swap. The printer’s on‑board calibration routine automatically aligns the new head, re‑establishing correct burn temperature for uncoated, coated, or synthetic labels in seconds. Within a single lunch break your ADTP1 is back to producing EPC Gen 2‑encoded RFID tags, pallet labels, shelf‑edge strips, or hard‑tagging inserts that scan on the first pass.     

✅Durability & Throughput
The ADTP1 family was engineered for 200–300 % faster throughput than many legacy industrial models, making head life a prime concern. This 300 dpi assembly carries the same ceramic‑coated heating elements found in the factory unit and is rated for millions of linear inches of output when used with approved media. Maintenance is straightforward: clean the head surface with isopropyl alcohol wipes after every ribbon roll or daily in dusty zones, and perform a deeper clean when switching between material types. Regular upkeep extends element life and preserves the printer’s ±0.3 mm barcode pitch accuracy.

✅Colour Fidelity in a Mono World
Although the ADTP1 prints only black imaging pixels, its ability to maintain tight dot registration on coated colour stocks is vital for brands relying on coloured eye‑marks or fine logos. A genuine 300 dpi head lays down uniform energy across the full 104 mm path, ensuring that customer‑facing hang tags, garment labels, or carton stickers look crisp and professional despite fast throughput.

✅RFID Integrity Preserved
When paired with the optional EPC UHF reader‑encoder, the ADTP1 validates each encoded tag in real time. Using a non‑approved printhead can desynchronise the inlay placement sensor, leading to read/write errors. The BP‑AT30MA preserves factory tolerances, so encoding, printing, and post‑encode verification stay aligned—a must for modern omnichannel logistics.

✅Sustainability Edge
Replacing only the imaging module, not the entire printer, aligns with corporate ESG goals by reducing e‑waste. The old head can be returned through Avery Dennison’s reclaim programme for responsible materials recovery, while the new unit arrives in fully recyclable packaging.

✅ Key Points

• True 300 dpi OEM printhead for ADTP1/ADTP1‑R printers
• 4.09 in / 104 mm maximum imaging width
• Supports thermal‑transfer & direct‑thermal at up to 12 ips  
• Preserves RFID encode & verify accuracy
• Tool‑free drop‑in installation and auto‑calibration
• Long life ceramic elements rated for millions of inches
• Protects printer warranty & reduces downtime
• Readily available in Bangladesh with express delivery