Audac VEXO8/B Compact High Power Speaker

Audac VEXO8/B Compact High Power Speaker in Bangladesh

The Audac VEXO8/B is a compact high-power, two-way passive speaker in black. Its supplied specifications list an 8-inch mid/low-frequency driver, a 1-inch compression high-frequency driver and a built-in passive crossover. It is rated at 175 W RMS/AES, with separate program and peak ratings of 350 W and 700 W. The listed impedance is 8 Ω. These details are useful when assessing the speaker for an audio system, but the amplifier, wiring and installation must be selected to suit the complete setup.

This is a passive speaker, not a self-powered unit. Plan to connect it to a suitable amplifier and follow the speaker’s connection instructions. The specifications do not state a recommended amplifier power range, so do not select an amplifier based only on the 700 W peak figure. Consider the separate power ratings, impedance and intended system design, and check the amplifier manufacturer’s guidance before installation.

The speaker uses two driver types: an 8-inch MF/LF driver and a 1-inch compression driver for high frequencies. A built-in passive crossover is listed at 1.25 kHz. This means the speaker’s passive design divides the signal between its driver sections; it does not mean the speaker has an internal amplifier. The crossover frequency and driver sizes are useful comparison points, but they do not alone determine how the speaker will sound in a particular room. The source material, amplifier, placement and room acoustics all matter.

Power handling is specified as 175 W RMS/AES, 350 W program and 700 W peak. These are separate ratings and should not be treated as interchangeable. The RMS/AES rating is the continuous-type figure listed for comparison; program and peak ratings describe different power-handling categories. In particular, 700 W peak should not be understood as a continuous operating target. Use the product documentation and amplifier guidance to plan the system, rather than treating the largest number as the recommended amplifier output.

The listed impedance is 8 Ω. This is a key consideration when matching the speaker with an amplifier and planning a system with one or more speakers. Check that the amplifier supports the intended load and that the wiring is appropriate for the system. The supplied information does not specify a recommended amplifier model, amplifier power range or wiring layout, so confirm these details for your installation. If several speakers are involved, have the complete configuration checked against the amplifier’s specifications.

Two speaker connectors are listed, described as link-through connectors. These may be relevant when planning a system that uses speaker link-through connections, but the supplied details do not identify the connector type or explain every supported wiring arrangement. Check the product’s connector markings and instructions before connecting it. Do not assume that a particular plug, cable or daisy-chain arrangement is included or supported unless confirmed for the exact speaker and system.

The frequency response is specified in two ways. The response within ±3 dB is listed as 65 Hz to 20 kHz, while the range at -10 dB is 55 Hz to 20 kHz. These are separate measurements with different tolerances and should not be merged into a single range. They can help when comparing speakers or checking a project’s frequency requirements. The response in an installed room may also be influenced by placement, surfaces, nearby objects and the rest of the audio system.

Sensitivity is listed as 92 dB at 1 W/1 m. This gives buyers a reference point for comparing the speaker with other products when the measurement basis is comparable. The maximum sound-pressure entry is supplied as 115 dBv at 1 m. Since the reference and measurement basis for that notation are not explained in the supplied details, retain the value as listed and confirm its intended meaning before using it in acoustic calculations or comparing it with other sound-pressure specifications.

Dispersion is specified as 100° horizontally and 80° vertically. These angles can assist with initial placement planning, particularly when considering the direction and area in which the speaker should be aimed. They do not, by themselves, determine how many speakers a room needs or guarantee even coverage. Room dimensions, listener positions, mounting height and reflections from walls or ceilings also influence the result. For a project with a defined coverage or sound-level requirement, evaluate the speaker in the context of the whole room and system.

The VEXO8/B is listed with a two-way revolving mounting bracket as an included accessory. This provides a mounting option to consider when planning a fixed installation. The supplied details do not explain every supported mounting orientation or the installation procedure, so check the product documentation and bracket instructions before fitting it. Confirm that the mounting surface, fasteners and installation method are appropriate for the speaker’s size and weight.

Two additional accessories are listed as optional: the WBP100 wall bracket mounting plate and the CHB196 35 mm pole adapter. They are not identified as included with the speaker. If your installation needs either accessory, check compatibility, availability and package contents before ordering. A mounting bracket is listed as included, but that does not confirm that all wall fixings or additional mounting hardware are supplied.

The speaker’s dimensions are 250 × 380 × 262 mm (W × H × D), and its listed weight is 9.7 kg. Use these figures to check the planned location and access route before installation. Consider the space needed for the cabinet, bracket, cables and any required adjustment. The mounting surface and attachment method should be suitable for the speaker’s weight. If you are choosing between wall and pole placement, confirm which mounting components are needed for the chosen arrangement.

Construction is listed as medium-density fibreboard with a structured coating, and the front finish is a steel grille. These are useful physical details when comparing products and planning how the speaker will fit into a room or installation. The supplied specifications do not include an ingress-protection rating or claim that the speaker is weatherproof. Do not assume that the cabinet or grille makes it suitable for rain, water exposure or other challenging outdoor conditions. Check the installation environment and confirm suitability before choosing a location.

The operating-temperature range is listed as -20 °C to 60 °C. This is one factor to check against the conditions at the planned installation site. It does not establish that the speaker is appropriate for every outdoor or exposed location, particularly because no IP rating is provided in the supplied details. Consider temperature, moisture, dust, mounting and the overall environment together, and request clarification if the location has specific environmental requirements.

The black model is identified as VEXO8/B in RAL9004. A separate white version is listed as VEXO8/W in RAL9003. This page is for the black speaker; verify the model code and colour on the quotation or product label if the finish matters to the project. The white version is a separate listed variant and is not described as part of the black model’s package.

The VEXO8/B may be considered for a fixed audio setup where a passive, two-way speaker with the stated power handling and dispersion is appropriate. Possible settings to evaluate include presentation areas, event or hospitality spaces, and other installations where an amplifier-driven speaker is needed. These are potential applications rather than a guarantee that the product will suit every room. The right choice depends on the sound level and coverage required, room characteristics, amplifier, mounting method and operating conditions.

For a presentation room or other listening space, begin by identifying the area that needs to be covered and the listeners’ positions. Compare those needs with the 100° horizontal and 80° vertical dispersion figures, and consider speaker placement and aiming. The sensitivity and frequency-response specifications can also help with comparison, but they do not replace a room-specific design. If speech clarity, music reproduction or a particular sound level is important, evaluate the complete system rather than relying on a single specification.

For systems using more than one speaker, plan the amplifier load and wiring before installation. The 8 Ω impedance is a relevant specification, but the correct system arrangement depends on the amplifier and how the speakers are connected. The two listed link-through speaker connectors may be useful in some setups; confirm connector type and permitted wiring in the product documentation. Do not assume that connecting additional speakers through link-through connectors will suit every amplifier configuration.

The built-in passive crossover means the speaker is designed with an internal passive division between its high-frequency and mid/low-frequency drivers. The supplied details do not describe external processing requirements, equalisation settings or a particular DSP configuration. If your system uses processing, follow the equipment documentation and confirm any recommended settings for the speaker. Avoid inventing a crossover or signal-processing arrangement based only on the listed 1.25 kHz passive crossover frequency.

Before buying, confirm whether you need the included revolving mounting bracket alone or one of the optional accessories. Check whether the WBP100 wall bracket mounting plate or CHB196 35 mm pole adapter is appropriate for your intended installation, and confirm that the accessory is compatible with the exact product. Ask what mounting hardware is included; the specifications list the bracket but do not specify every fixing, cable or accessory in the package.

The supplied specifications do not state a warranty period, country of manufacture, package contents beyond the included bracket, or a recommended amplifier power range. They also do not provide an IP rating or explain the 115 dBv measurement reference. Ask BME to confirm any of these details that matter to the project. If delivery, installation or other services are important, check whether they are available for your location and what terms apply rather than assuming they are included.

The Audac VEXO8/B is best assessed as an 8 Ω passive two-way speaker with a built-in crossover, an 8-inch MF/LF driver and a 1-inch compression driver. Its separate power ratings, frequency-response figures, dispersion, connectors and mounting options provide useful points for system planning. Confirm amplifier compatibility, mounting requirements and the measurement details that matter to your application before ordering. This helps you evaluate the speaker based on its stated specifications and your real installation needs.

✅ Key Features

• Passive two-way design: Combines an 8-inch MF/LF driver and a 1-inch compression HF driver.
• Built-in passive crossover: The crossover frequency is listed as 1.25 kHz.
• 175 W RMS/AES handling: Provides a key power-handling figure for system comparison.
• Separate power ratings: Also lists 350 W program and 700 W peak handling.
• 8 Ω impedance: Check amplifier compatibility and system wiring before use.
• Wide stated frequency range: Lists 65 Hz–20 kHz at ±3 dB and 55 Hz–20 kHz at -10 dB.
• Defined dispersion: Specifies 100° horizontal and 80° vertical dispersion.
• Link-through connectors: Includes two speaker connectors described as link-through.
• Mounting bracket included: A two-way revolving mounting bracket is listed as an included accessory.
• Optional installation accessories: WBP100 wall bracket mounting plate and CHB196 35 mm pole adapter are listed as optional.
• Black finish: The black version is identified as VEXO8/B in RAL9004.

✅ Usage / Applications

• Presentation spaces: Evaluate it for an amplifier-driven audio setup where its power and coverage specifications fit the room.
• Event spaces: Consider it for a planned fixed audio installation after checking system requirements.
• Hospitality venues: Assess it for suitable indoor audio use, subject to room design and installation conditions.
• Meeting areas: Compare its dispersion and system requirements with the listening area.
• Wall-mounted installations: Use the included revolving mounting bracket where the planned setup is compatible.
• Pole-mounted setups: Check whether the optional CHB196 35 mm pole adapter suits the installation.
• Multi-speaker systems: Verify amplifier load and permitted link-through wiring before connecting multiple speakers.
• Fixed passive audio systems: Pair with an appropriate amplifier and system design.

✅ Benefits of This Product?

• Useful system-planning detail: Separate RMS/AES, program and peak ratings help clarify power comparisons.
• Specified driver configuration: The 8-inch MF/LF and 1-inch compression HF drivers are clearly identified.
• Built-in crossover: Provides a stated passive crossover frequency for product evaluation.
• Placement reference: The 100° × 80° dispersion figures can inform aiming and coverage planning.
• Mounting flexibility to assess: An included revolving bracket and separately listed optional accessories support installation planning.
• Clear model and finish identification: The black version is specified as VEXO8/B in RAL9004.
• Physical planning information: Dimensions and weight help check placement and mounting requirements.
• More informed selection: Confirming amplifier, mounting and environment requirements helps avoid unsupported assumptions.

✅ Ideal For

The Audac VEXO8/B may suit buyers planning an amplifier-driven audio installation that needs a passive two-way speaker with clearly stated power ratings and mounting options. Its 8-inch MF/LF driver, 1-inch compression HF driver, 1.25 kHz passive crossover and 100° horizontal by 80° vertical dispersion provide specifications to compare with a room and system design. It may be evaluated for presentation, event, hospitality or other fixed audio settings when the amplifier, placement and coverage requirements are appropriate.

This speaker is not specified as powered, so the amplifier and wiring must be chosen to suit its 8 Ω impedance and the overall system. Buyers should also check the mounting surface, accessory requirements and operating environment. No IP rating is supplied, so do not assume outdoor or weatherproof suitability. The black model is VEXO8/B in RAL9004; confirm this variant if colour is important.

✅ Why Choose the Audac VEXO8/B Compact High Power Speaker?

The Audac VEXO8/B is worth considering when you need a passive two-way speaker and want its power, driver and mounting specifications to be clearly identified. The 8-inch MF/LF driver and 1-inch compression HF driver are paired with a built-in passive crossover listed at 1.25 kHz. Its 175 W RMS/AES rating is complemented by separate 350 W program and 700 W peak figures, allowing a more careful comparison than a single headline wattage.

The listed 8 Ω impedance makes amplifier matching a key part of the purchase decision. The speaker also includes two connectors described as link-through, but the connector type and supported wiring arrangements should be verified in the product instructions. If your setup uses more than one speaker, check the amplifier’s permitted load and plan the connections before installation.

For placement planning, the specifications provide 100° horizontal and 80° vertical dispersion, along with frequency response of 65 Hz–20 kHz at ±3 dB and a -10 dB range of 55 Hz–20 kHz. These are useful comparison details, but they do not replace an assessment of the room, listening positions or sound level required. The supplied maximum sound-pressure entry is 115 dBv at 1 m; confirm its reference before comparing it with other acoustic measurements.

The black VEXO8/B includes a two-way revolving mounting bracket. A WBP100 wall bracket mounting plate and CHB196 35 mm pole adapter are listed as optional accessories. Confirm which parts you need and whether they are compatible with your installation. The best choice is one that matches the amplifier, room, mounting plan and operating environment—not just the speaker’s peak rating.

✅ Why Buy This Product from BME?

When enquiring with BME about the Audac VEXO8/B, specify the black model and ask for the current quotation. If you are integrating it into an existing audio system, share the amplifier and installation details so you can confirm the 8 Ω connection, speaker wiring and mounting requirements for your setup.

The supplied specifications list a two-way revolving mounting bracket as included, while the WBP100 wall bracket mounting plate and CHB196 35 mm pole adapter are optional. Ask BME to confirm which items are included with the exact product being quoted and whether the optional accessory you need is compatible. You can also ask about the recommended amplifier range, package contents and the reference for the listed 115 dBv figure, as these details are not explained in the supplied information.

Warranty, delivery, installation and other services are not specified here. Ask BME whether any service you need is available for your location and what terms apply; do not assume it is included. Confirm the model code, colour, accessories and purchase terms before ordering so that the product and setup match your requirements.

✅ Buying Guide

• Confirm the model and finish: The black version is VEXO8/B in RAL9004; VEXO8/W is a separate white variant.
• Choose a compatible amplifier: Check the 8 Ω impedance and amplifier guidance before connecting the speaker.
• Read the power ratings correctly: Treat 175 W RMS/AES, 350 W program and 700 W peak as separate ratings.
• Plan the speaker layout: Compare 100° horizontal and 80° vertical dispersion with the room and listener positions.
• Check the connectors: The two connectors are described as link-through; confirm their type and supported wiring.
• Plan mounting: A revolving bracket is listed as included; confirm the mounting surface and required fixings.
• Check optional accessories: WBP100 and CHB196 are listed as optional, not included.
• Assess the environment: No IP rating is provided, so do not assume weatherproof or outdoor suitability.
• Clarify acoustic measurements: Ask about the reference for the maximum sound-pressure entry listed as 115 dBv.
• Review installation requirements: Confirm dimensions, weight, cable access and the planned mounting position.
• Avoid common mistakes: Do not treat peak power as continuous power or assume multiple speakers can be connected without checking amplifier load.
• Confirm purchase terms: Ask BME about the exact product, package contents and any services or terms that matter to you.

✅ Customers Ask About / Frequently Asked Questions

• Q: What is the Audac VEXO8/B price in Bangladesh?
  A: Contact BME for the current quotation.

• Q: Is the VEXO8/B a powered speaker?
  A: It is specified as a passive speaker with a built-in passive crossover, so the system needs a compatible amplifier.

• Q: What are its power ratings?
  A: The listed ratings are 175 W RMS/AES, 350 W program and 700 W peak.

• Q: What drivers does it use?
  A: An 8-inch MF/LF driver and a 1-inch compression HF driver are listed.

• Q: What is the speaker’s impedance?
  A: The supplied specification lists 8 Ω. Check amplifier compatibility before use.

• Q: What is the maximum sound-pressure rating?
  A: The supplied entry reads 115 dBv at 1 m. Confirm its measurement reference before comparing it with other SPL specifications.

• Q: Does the speaker include a mounting bracket?
  A: A two-way revolving mounting bracket is listed as included.

• Q: Are the WBP100 and CHB196 included?
  A: They are listed as optional accessories. Confirm their availability and compatibility separately.

• Q: Is the VEXO8/B suitable for outdoor use?
  A: No IP rating or weatherproof claim is supplied. Verify environmental suitability before selecting an exposed location.

• Q: Where can I enquire about the Audac VEXO8/B in Bangladesh?
  A: Contact BME to confirm the current quotation, exact model and purchase details.

✅ Why Buy This Product

The Audac VEXO8/B is a speaker to consider when your project calls for a passive two-way design with an 8-inch MF/LF driver, a 1-inch compression HF driver and a built-in 1.25 kHz crossover. Its 175 W RMS/AES, 350 W program and 700 W peak ratings provide separate figures for system comparison, while its 100° horizontal and 80° vertical dispersion can assist with placement planning.

Before choosing it, check amplifier compatibility, wiring, mounting and the number of speakers required. The included revolving bracket and optional WBP100 wall plate and CHB196 pole adapter should be reviewed against your installation. The supplied information does not state an IP rating, so confirm suitability for the intended environment. Also clarify the measurement reference for the 115 dBv entry if it matters to your design.

If the VEXO8/B matches your system and installation needs, contact BME to confirm the exact model, accessories and purchase terms before ordering.