Audac WX302MK2 30W 2-Way Universal Wall Speaker

Audac WX302MK2 30W 2-Way Universal Wall Speaker in Bangladesh

The Audac WX302MK2 is a passive, two-way wall speaker in black, with a stated RMS/AES power handling of 30 W. Its supplied specifications list a 3-inch low-frequency driver, a 1-inch high-frequency driver and a built-in passive crossover. It is specified for 8 Ω operation and also has transformer taps for 70 V and 100 V line systems. These details make it a model to assess for a fixed audio installation where a wall-mounted speaker is appropriate and the amplifier and wiring can be matched to its requirements.

The speaker is described as “universal” in the product title, but that word should not be taken to mean it connects to every amplifier or system without checking. The supplied specifications identify different connection options—8 Ω and transformer taps for 70 V or 100 V. The correct setup depends on the amplifier and installation design. Confirm the connection method and tap setting using the product’s markings and wiring instructions before installation.

Its two-way configuration uses a 3-inch LF driver and a 1-inch HF driver, with a built-in passive crossover specified at 2.5 kHz. The crossover is part of the speaker’s passive system; it does not mean the speaker has a built-in amplifier. The product information does not specify a powered connection, so plan for a compatible amplifier and suitable wiring. Driver size and crossover frequency are useful comparison details, but do not alone determine the speaker’s suitability for a room or audio project.

Two frequency specifications are listed. The frequency range at -10 dB is 60 Hz to 20 kHz, while the response within ±3 dB is 90 Hz to 18 kHz. These figures use different stated tolerances and should be considered separately. They are useful when comparing products or checking a project requirement, but the sound heard in a space will also depend on the room, speaker position, amplifier and source material. If a particular frequency response is important, check that these specifications fit the intended application.

Power handling is specified in three categories: 30 W RMS/AES, 60 W program and 120 W peak. These figures describe different rating types and should not be treated as interchangeable. In particular, the 120 W peak figure is not the continuous rating. Use the speaker documentation and amplifier manufacturer’s guidance when matching equipment and setting up the system. The supplied specifications do not give a recommended amplifier power range, so confirm the appropriate amplifier and operating conditions rather than selecting equipment based on the peak figure alone.

The listed impedance is 8 Ω. This value is relevant when assessing compatibility with a low-impedance amplifier output. The speaker also has transformer taps for 70 V and 100 V line systems, which are used in some distributed-audio designs. The correct connection depends on the intended system. Do not assume that the 8 Ω connection and the transformer-line connections are interchangeable; follow the speaker’s connection diagram and amplifier instructions.

The supplied transformer-tapping information lists four settings:

• Tap 1: 250 Ω; 100 V — not used; 70 V — 20 W.
• Tap 2: 500 Ω; 100 V — 20 W; 70 V — 10 W.
• Tap 3: 1,000 Ω; 100 V — 10 W; 70 V — 5 W.
• Tap 4: 2,000 Ω; 100 V — 5 W; 70 V — 2.5 W.

The Tap 1 entry is specifically marked “not used” for 100 V in the supplied information. Check the markings and wiring diagram on the exact speaker before connecting it. For an installation using multiple speakers, have the installer confirm the tap selection and total system load against the amplifier and project requirements. Do not choose a tap based only on the speaker’s 30 W RMS/AES rating.

Sensitivity is listed as 85 dB at 1 W/1 m. The maximum sound-pressure figures supplied are 95 dB at 100 V and 100 dB at 8 Ω. These figures provide comparison points, but they do not guarantee a particular sound level in every room. Results depend on system configuration, amplifier, placement, listening distance and the acoustics of the space. If a required level or coverage area is important, assess the speaker as part of the complete system rather than relying on one rating.

The specified dispersion is 100° horizontally and 100° vertically. This can inform placement planning, but it does not determine by itself how many speakers a room needs or guarantee even sound throughout it. Room dimensions, ceiling height, listener positions, surface reflections and speaker orientation all matter. Consider the intended listening area and installation position, and seek project-specific audio advice for larger or more complex spaces.

The WX302MK2 is listed with a mounting bracket. Its dimensions, including the bracket, are 188.4 × 129 × 164.8 mm (W × H × D), and its weight is 1.66 kg. These measurements can help with space planning and checking the intended mounting location. Confirm that the wall and mounting approach are suitable for the installation. The supplied details list the bracket but do not specify wall-fixing hardware, so check whether the required fixings are included or need to be provided separately.

The cabinet construction is specified as ABS, and the front finish is a steel grille. The ingress protection rating is IP40. Do not interpret IP40 as a waterproof rating or assume that the speaker is designed for exposure to rain or water. If the installation location has moisture, dust or other environmental concerns, verify suitability against the complete site conditions before selecting the speaker. The materials and ingress rating are product details to check, not a substitute for assessing the intended environment.

The listed operating-temperature range is -25 °C to 70 °C. This is a specification buyers can compare with the conditions at the planned location. It should not be treated on its own as proof that the speaker is suitable for outdoor or exposed use. Operating temperature and ingress protection describe different considerations; check both, along with the installation conditions, before choosing where to mount the unit.

The black speaker is identified as RAL9005, model WX302MK2/B. The supplied specifications also name a white version, RAL9003, model WX302MK2/W. This page is for the black variant. If colour matters to your project, confirm that the quotation and product label show WX302MK2/B rather than the separately listed white model. The presence of a white variant in the product range does not mean it is included with the black speaker.

The model may be considered for fixed sound systems in settings such as offices, meeting rooms, shops or hospitality interiors, provided its ratings, connections and installation conditions suit the project. These are potential use cases, not a guarantee that one speaker will provide adequate coverage for any particular space. The number of speakers, their locations, the amplifier and the chosen connection method should be determined for the room and listening requirements.

For speech or background-audio applications, assess the intended listening area and the speaker’s specified dispersion alongside the room layout. The 100° horizontal and vertical dispersion figures can help frame that assessment, while the sensitivity and maximum sound-pressure figures offer further points for system comparison. They do not replace a room-specific design. A suitable installation depends on speaker spacing, mounting position, amplifier setup and the level of sound required.

In a distributed system, the 70 V and 100 V transformer taps provide selectable settings listed in the specifications. Select the tap in line with the system design and amplifier instructions. For a multi-speaker installation, the installer should check the selected tap for each unit and confirm that the overall arrangement is appropriate for the amplifier. The supplied tap table provides individual settings; it does not establish how many speakers a particular amplifier can support.

For an 8 Ω setup, check that the amplifier supports the intended load and that the correct speaker terminals or selector position are used. Do not connect the speaker based only on the model title or its “universal” description. Where more than one speaker is used, have the complete wiring arrangement checked against the amplifier specifications. Using the wrong connection mode or tap can create a system mismatch, so follow the product instructions and have the installation completed by someone familiar with the equipment.

The included mounting bracket supports wall-mount planning, but the supplied details do not describe a mounting orientation, wall material or included fixing screws. Check the installation surface, access to wiring and required clearances before mounting. The listed dimensions include the bracket, which is useful for planning the space occupied by the assembly. If an exact finish or mounting arrangement is essential, confirm the details for the quoted variant before purchase.

The speaker’s 30 W RMS/AES rating may be useful when comparing it with an amplifier and project requirements, while the 60 W program and 120 W peak figures describe other ratings. Do not use the highest number as though it were the continuous operating rating. Match the system according to the complete product documentation and amplifier guidance. If you are replacing another speaker, compare its impedance, connection mode, power ratings and installation needs rather than assuming that a similar size or appearance guarantees a direct replacement.

The supplied information does not state a warranty period, country of manufacture, cable contents or whether installation service is available. It also does not specify a recommended amplifier range or provide a complete installation guide. Ask BME to confirm details that matter to your purchase and request the applicable terms for the exact product. If delivery or another service is important, ask whether it is available for your location and what conditions apply rather than assuming it is included.

Before ordering, identify the intended connection type, amplifier output, required tap and mounting location. Confirm the black variant code, check the wall space and review the IP40 rating against the installation environment. If you have a project-specific sound-level or coverage requirement, compare the listed sensitivity, maximum sound-pressure figures and dispersion with that requirement. These checks help determine whether the WX302MK2 is suitable for the system without making assumptions based on the title or a single specification.

The Audac WX302MK2 is best assessed as a passive two-way wall speaker with a 3-inch LF driver, a 1-inch HF driver, 8 Ω impedance and specified 70 V/100 V transformer taps. Its power ratings, response figures, dispersion, materials and mounting dimensions provide useful information for product comparison and system planning. Confirm the connection and tap with the amplifier, and make sure the black variant and installation conditions match your requirements before buying.

✅ Key Features

• Passive two-way design: Uses a 3-inch LF driver and a 1-inch HF driver with a built-in passive crossover.
• 30 W RMS/AES handling: Provides a stated rating for system-planning comparisons.
• Separate power ratings: Lists 60 W program and 120 W peak handling in addition to RMS/AES power.
• 8 Ω and line-transformer options: Specifies 8 Ω impedance and transformer taps for 70 V and 100 V systems.
• Two response specifications: Lists 60 Hz–20 kHz at -10 dB and 90 Hz–18 kHz within ±3 dB.
• Specified dispersion: Lists 100° horizontal and 100° vertical dispersion.
• Wall-mount bracket included: The listed mounting bracket is included; confirm any additional fixings required.
• Black finish: The black version is listed as RAL9005, model WX302MK2/B.
• ABS enclosure and steel grille: Provides construction details for product comparison.
• IP40 rating: Check the rating against the intended environment; it is not a waterproof claim.

✅ Usage / Applications

• Office audio: Consider it for a wall-mounted passive audio system planned for an office.
• Meeting rooms: Assess the stated dispersion and power ratings against the room layout.
• Retail interiors: Evaluate it for a suitable fixed audio installation in a shop.
• Hospitality spaces: Consider it for an indoor audio plan after checking system and site requirements.
• Training rooms: Compare its coverage specifications with the listening area and room design.
• Distributed audio: Use the listed 70 V or 100 V transformer taps only with a compatible system.
• 8 Ω installations: Check the listed impedance when matching the speaker to an amplifier.
• Fixed wall mounting: Use the included bracket as part of a correctly planned installation.

✅ Benefits of This Product?

• Multiple connection options to assess: The listed 8 Ω impedance and transformer taps may suit different system designs when correctly matched.
• Useful power-rating detail: Separate RMS/AES, program and peak figures support more informed amplifier comparisons.
• Defined two-way configuration: Driver sizes and crossover frequency are specified for product evaluation.
• Placement planning reference: The 100° × 100° dispersion figures can help inform room-layout decisions.
• Wall-mount planning: Dimensions and an included bracket provide practical information for installation checks.
• Finish choice within the range: A separate white model is listed alongside the black variant.
• Environment information: The IP40 rating and operating-temperature range are available for site checks.
• Clear tap settings: The supplied 70 V and 100 V tap data can assist project-specific system planning.

✅ Ideal For

The Audac WX302MK2 may suit organisations looking for a passive wall speaker to include in a planned audio system. Its 8 Ω impedance and listed 70 V/100 V transformer taps give installers specifications to compare with an amplifier and wiring design. The 3-inch LF driver, 1-inch HF driver, built-in crossover and 100° horizontal and vertical dispersion are also useful details when evaluating the speaker for a room.

It may be considered for offices, meeting rooms, retail interiors, hospitality spaces or training rooms if the output, coverage and installation requirements suit the project. It is not a powered speaker, so the system needs a compatible amplifier. Buyers should confirm the selected connection and tap, check the wall and bracket requirements, and consider the IP40 rating before choosing an installation location. The black version is WX302MK2/B; white is a separate variant.

✅ Why Choose the Audac WX302MK2 30W 2-Way Universal Wall Speaker - Black?

The Audac WX302MK2 is worth considering when a project requires a passive, wall-mounted speaker with specified driver, power and connection details. Its 3-inch LF driver and 1-inch HF driver are paired with a built-in passive crossover listed at 2.5 kHz. The supplied ratings distinguish 30 W RMS/AES from 60 W program and 120 W peak handling, giving buyers more useful comparison points than a single wattage figure.

The speaker’s 8 Ω impedance and transformer taps for 70 V and 100 V systems provide connection details to review against the amplifier and installation design. The supplied tap table lists settings from 2.5 W to 20 W across the specified line-voltage combinations, with the first tap marked as not used at 100 V. The selected connection must match the system, so check the speaker markings and instructions before wiring.

Its frequency specifications, 100° × 100° dispersion, mounting dimensions and included bracket can help with product comparison and planning. The black version is identified as WX302MK2/B in RAL9005; the listed white version is a separate model. The IP40 rating is also worth reviewing, especially for installations where the environment matters.

The right choice depends on the room, amplifier, wiring, tap setting and mounting location. Confirm these requirements and the applicable purchase terms before ordering. This helps ensure that the speaker’s listed specifications align with the actual installation rather than relying on its title alone.

✅ Why Buy This Product from BME?

When enquiring with BME about the Audac WX302MK2, specify the black variant, model WX302MK2/B, and ask for the current quotation. The product information also lists a white variant, so confirm that the item being offered has the colour and model code you need.

If you are connecting it to an existing sound system, be ready to identify the amplifier type and whether your installation uses 8 Ω, 70 V or 100 V operation. Ask about the relevant product details and check the tap setting against the system design and speaker instructions. You can also confirm what is included beyond the listed mounting bracket and whether any other installation items are required.

The supplied product details do not state warranty terms, country of manufacture, cable contents or whether installation or delivery services are available. Ask BME about any detail or service that matters to your purchase, including its terms and availability for your location. Confirm the exact variant and purchase conditions before ordering rather than assuming that additional services are included.

✅ Buying Guide

• Confirm the variant: The black model is WX302MK2/B in RAL9005; the white WX302MK2/W is separate.
• Identify your amplifier: Check whether the system uses 8 Ω, 70 V or 100 V operation.
• Choose the correct tap: Match the transformer setting to the amplifier and system design.
• Check the tap table: The 250 Ω tap is marked “not used” for 100 V in the supplied information.
• Understand the ratings: Treat 30 W RMS/AES, 60 W program and 120 W peak as different figures.
• Plan the speaker layout: Compare the 100° horizontal and vertical dispersion with the room and listener positions.
• Check mounting requirements: Allow for the listed dimensions and weight, and confirm the wall and fixing method.
• Verify included hardware: A mounting bracket is listed; ask whether wall-fixing hardware is also included.
• Assess the environment: IP40 is specified; do not assume waterproofing or suitability for exposed wet locations.
• Check the complete system load: For multiple speakers, have the tap selections and amplifier arrangement reviewed by a qualified installer.
• Follow wiring instructions: Do not assume 8 Ω and 70 V/100 V connections are interchangeable.
• Confirm purchase details: Ask BME about the exact model, current terms and any service you require.

✅ Customers Ask About / Frequently Asked Questions

• Q: What is the Audac WX302MK2 price in Bangladesh?
  A: Contact BME for the current quotation.

• Q: Is the WX302MK2 a powered speaker?
  A: No. It is specified as a passive speaker and requires a compatible amplifier.

• Q: What are its power ratings?
  A: The listed ratings are 30 W RMS/AES, 60 W program and 120 W peak.

• Q: Can it be used with 70 V or 100 V systems?
  A: Transformer taps for both are listed. Confirm the correct tap and connection for your amplifier and system.

• Q: What does the first transformer tap specify?
  A: It is listed as 250 Ω, with 70 V at 20 W and 100 V marked “not used.” Check the product markings before wiring.

• Q: What drivers does this speaker have?
  A: The supplied specifications list a 3-inch LF driver and a 1-inch HF driver.

• Q: What is the crossover frequency?
  A: The built-in passive crossover is listed at 2.5 kHz.

• Q: Is the WX302MK2 waterproof?
  A: It is listed as IP40, but the supplied information does not claim waterproof or outdoor use.

• Q: Does it include a mounting bracket?
  A: A mounting bracket is listed as included. Confirm whether any wall-fixing hardware is also supplied.

• Q: Is a white version available?
  A: The supplied specifications list a separate white variant, WX302MK2/W. Confirm current availability with BME.

✅ Why Buy This Product

The Audac WX302MK2 is a model to consider when you need a passive two-way wall speaker with stated 8 Ω impedance and 70 V/100 V transformer taps. Its 3-inch LF and 1-inch HF drivers, built-in crossover and separate power ratings provide useful details for comparing it with an amplifier and installation plan. The black version is identified as WX302MK2/B, so buyers can check the colour and model code before purchase.

Before choosing it, confirm the connection mode and tap setting required by your system. Review the 100° × 100° dispersion and the IP40 rating against the planned location; do not assume the speaker is suitable for wet or exposed use. Check mounting requirements and the supplied bracket details as well.

If the WX302MK2/B suits your project, contact BME to confirm the exact variant and purchase terms before placing an order.