Televic CONFIDEA WAP G4 Wireless Access Point with Dante

Televic CONFIDEA FLEX G4 Wireless Tabletop Conference Unit in Bangladesh

The Televic CONFIDEA WAP G4 Wireless Access Point with Dante is a conference-system component specified with Wi-Fi 5 (IEEE 802.11ac), 2.4 GHz and 5 GHz radio bands, and a maximum listed capacity of 128 units. The supplied specifications also state limits of eight open microphones and eight interpretation channels. These figures offer useful starting points for system planning, but they describe different capacities and should not be taken to mean that every maximum is available at the same time under all configurations.

Consider it as part of a compatible system: The product is described as a wireless access point for conference use. It should not automatically be treated as a general-purpose office Wi-Fi router or internet gateway: routing, internet access and other conventional router functions are not listed. Before buying it for an existing installation, confirm compatibility with the specific Televic conference equipment, required system components, configuration and network plan. That check is particularly important if the installation also depends on Dante audio.

Wireless standard and bands: The supplied specification identifies Wi-Fi 5, IEEE 802.11ac, operating in the 2.4 GHz and 5 GHz bands. It also lists five antennas and an equivalent isotropically radiated power (ERP) below 24 dBm. These details can help with radio planning, but no channel plan, bandwidth, antenna pattern or interference-performance data was provided. Check the requirements of the complete conference system and the venue before planning wireless operation.

Capacity figures: The maximum number of units is listed as 128, while the maximum number of open microphones is listed as eight and the maximum number of interpretation channels as eight. These are separate system limits, not interchangeable measures. The supplied information does not explain whether all three limits can be reached simultaneously or how the figures vary with configuration. If a meeting or event depends on a particular number of active microphones or interpretation channels, ask for confirmation against the intended system design.

Wireless coverage: The stated range is 40 m. Treat this as the supplied product figure, not as a guaranteed distance in every building. Walls, furniture, people, other radio equipment, installation height and antenna placement can affect wireless coverage. A venue with several rooms, dense construction or a high number of wireless devices may need a site-specific plan. Confirm where the access point should be mounted and whether the intended coverage area fits the system’s design before relying on the stated range.

Latency and digital audio: The audio specification lists 48 kHz / 24 bit, a 20 Hz–20 kHz frequency response, dynamic range above 90 dB, signal-to-noise ratio above 95 dBA and THD below 0.02%. Latency is stated as 16 ms for the “microphone to WAP - WAP to loudspeaker” path. The supplied wording does not clarify whether that timing refers to each part of the path or the combined path, so confirm its interpretation if latency is important to your application.

Dante details to verify: The product title identifies the WAP G4 as “with Dante,” but the supplied technical information does not describe Dante-specific ports, channel counts, clocking, configuration, software requirements or network topology. Do not infer those details from the product title or from the general audio figures alone. If the system must connect to a Dante network, confirm exactly how Dante is implemented on this model, which interface is used and what configuration or compatible equipment is required.

LAN interface: The LAN interface is specified as Ethernet with a 100 Mbps link speed and an RJ45 connector. The supplied cable requirement is shielded cable specified as greater than Cat5e, with a maximum cable length of 100 m. Network configuration is listed as DHCP, NTP or Manual. If your network plan depends on a particular addressing or time-synchronisation setup, clarify the meaning of that configuration entry before installation. The listed 100 Mbps speed should not be mistaken for a gigabit Ethernet connection.

Separate Plixus interface: A Plixus interface is also specified as Ethernet at 100 Mbps, using an RJ45 connector. Its entry lists 48 V DC and a continuous output current of 2 A, along with shielded cable specified as greater than Cat5e and a maximum cable length of 80 m. The supplied information does not explain the full port role or which connected equipment those power details apply to. Confirm the connection and power requirements with the system documentation before attaching other devices.

Plan cabling by interface: The LAN and Plixus specifications give separate cable limits: 100 m for LAN and 80 m for Plixus. Both specify shielded cable above Cat5e. Keep the two interfaces and their respective requirements distinct when planning a run. The supplied details do not state whether the cable-length limits include patch leads, intermediate couplers or any particular installation arrangement. Check the manufacturer’s installation guidance if a cable run approaches either limit.

Security information: WPA2 Enterprise is listed as the encryption type. The security section also lists 802.1X authentication using MD5, TLS and PEAP-MSCHAPv2, specifically for the LAN port only. Do not extend that LAN-port authentication statement to the wireless interface: the supplied data does not explain its full wireless authentication configuration. If the venue has defined network-security policies, confirm which settings the WAP G4 supports and how they are applied before bringing it onto the network.

Balanced audio input: The audio input is specified as balanced, with a 3-pin Phoenix mini combicon connector and an input impedance above 10 kΩ. Its nominal input level is 0 dBV and maximum input level is +10 dBV. The listed frequency response is 20 Hz–20 kHz, THD is below 0.02% at nominal level, dynamic range is above 90 dB and signal-to-noise ratio is above 95 dBA. These figures are useful for checking an audio connection, but the supplied details do not identify the connector pin assignment or include a wiring diagram.

Balanced audio output: The audio output is also specified as balanced with a 3-pin Phoenix mini combicon connector. Its nominal output level is 0 dBV, with a maximum level of +10 dBV and a listed load impedance above 600 Ω. Frequency response is 20 Hz–20 kHz, THD is below 0.02% at nominal level and dynamic range is above 90 dB. Confirm the receiving equipment’s connection and input requirements before wiring. A matching connector alone does not establish that levels, pin assignments or the complete signal path are compatible.

Recording specifications: The recording section lists MP3 as the format, with quality options of 64, 128, 196 and 256 kbps, and a maximum size of 500 GB. The supplied information does not describe recording controls, how recording is started, or how the storage limit is applied. The rate “196 kbps” is reproduced as provided; confirm the available settings if a specific recording quality or file size is important to the project.

USB and internal storage: The USB interface is specified as USB 2.0, with NTFS format and a maximum size of 500 GB. Internal storage is listed as 4 GB. Confirm which storage arrangements the system supports and whether the USB storage device is included with the unit; no such inclusion is specified. If a recording workflow is essential, check the supported drive format and capacity against the intended files and system setup before the equipment is installed.

Power requirements: The WAP G4 is specified as a PoE+ device compliant with 802.3at Type 2 PD. A powered device receives power from a compatible source; this specification does not establish PoE output for powering other equipment. Typical power consumption is 15 W and maximum consumption is 24 W. Check that the intended PoE+ source and its available power budget meet the unit’s requirements. Do not select a power source based only on the presence of an RJ45 socket.

Mounting options: The listed mounting types are wall, ceiling, electrical box and microphone stand. This provides several installation arrangements to investigate, but the supplied details do not confirm which brackets, adapters or mounting hardware are included. Check the required mounting method and any accessories before ordering, particularly if the unit must fit an existing electrical box or attach to a microphone stand. Also consider placement in relation to cabling and the desired wireless coverage.

Dimensions and handling: The unit is specified as 191 × 45 × 191 mm (W × H × D), with a weight of 680 g. Packed dimensions are listed as 233 × 46 × 233 mm, with a packed weight of 825 g. The supplied imperial packed dimensions appear inconsistent with the metric depth, so use the metric packed measurements pending confirmation if packaging clearance matters. The casing material is ABS and the listed colour is white.

Operating environment: The supplied operating temperature range is 0–45°C, and the storage and transport range is −20–60°C. Humidity is listed as greater than 5% and less than 95%; the measurement basis is not specified. Use these figures as planning references and confirm environmental requirements for the intended location. No IP rating or water-resistance claim was supplied, so do not assume the unit is suitable for exposed or wet environments.

Warranty and purchase checks: The supplied product information lists a three-year brand warranty. Confirm the warranty issuer, coverage, eligibility and terms applicable in Bangladesh with BME before ordering. It is also useful to confirm the precise WAP G4 variant, Dante implementation, included mounting hardware and required system components. The product specifications provide multiple planning details, but they do not replace confirmation of a complete system design.

Overall, the Televic CONFIDEA WAP G4 offers a specification set covering wireless operation, wired interfaces, PoE+ input, balanced analog audio, recording and several mounting options. Its listed capacity, 40 m range and Dante wording can help frame an enquiry, but exact system compatibility and the Dante implementation are important open checks. Confirm those details, the interface roles, cable requirements and package contents with BME before selecting the unit for a new installation or adding it to an existing conference system.

✅ Key Features

• Wi-Fi 5 Wireless Standard: Supports the listed IEEE 802.11ac standard across 2.4 GHz and 5 GHz bands.
• Listed Conference Capacity: Specifications state up to 128 units, eight open microphones and eight interpretation channels; confirm configuration limits.
• Dante-Identified Model: The product title includes Dante; verify its exact interface and system requirements before purchase.
• PoE+ Powered Device: Uses an 802.3at Type 2 PD power input, with maximum consumption listed as 24 W.
• Two Specified Ethernet Interfaces: LAN and Plixus are each listed at 100 Mbps with RJ45 connectors.
• Balanced Analog Audio Connections: Input and output use 3-pin Phoenix mini combicon connectors.
• Audio Recording Options: MP3 recording quality is listed at 64, 128, 196 and 256 kbps.
• Flexible Mounting Types: Wall, ceiling, electrical box and microphone stand are listed as mounting options.
• Specified Wireless Range: A 40 m range is listed; actual coverage depends on the installation environment.
• Four-Gigabyte Internal Storage: The product specifications list 4 GB of internal storage.

✅ Usage / Applications

• Televic Conference Setups: Consider as an access point within a compatible conference-system design.
• Meeting Rooms: Plan for wireless conference use after checking the system’s unit and microphone limits.
• Boardrooms: Assess for a structured meeting installation with suitable network, mounting and power arrangements.
• Interpretation Workflows: Evaluate when interpretation channels are required, after confirming system configuration.
• Dante-Related Audio Systems: Consider only after verifying how Dante is implemented and which connection it uses.
• Audio Input and Output Connections: Use the balanced analog interfaces when their levels and wiring match the connected equipment.
• Recording Workflows: Assess the listed MP3 settings and storage limits against the intended recording plan.
• Flexible Mounting Installations: Check which listed wall, ceiling, electrical-box or microphone-stand arrangement suits the venue.
• PoE+ Installations: Plan a compatible 802.3at Type 2 power source with sufficient capacity for the stated maximum consumption.

✅ Benefits of This Product?

• Clearer Wireless Planning: The listed Wi-Fi standard, frequency bands, antenna count and range give useful starting points for a site plan.
• Defined Capacity References: Separate unit, open-microphone and interpretation-channel figures help frame system-design questions.
• Flexible Installation Planning: Multiple listed mounting types provide options to investigate for different room layouts.
• PoE+ Power Planning: The PD specification and maximum consumption help buyers check the proposed power source.
• Wired Audio Options: Balanced analog input and output provide specified connections to evaluate against other audio equipment.
• Recording Format Guidance: Listed MP3 rates and storage limits help with recording-workflow checks.
• Network Security Reference: WPA2 Enterprise and the stated LAN-port authentication methods support a more informed compatibility enquiry.
• Better Informed System Selection: Verifying Dante, interface roles and system compatibility before purchase helps reduce planning surprises.

✅ Ideal For

The Televic CONFIDEA WAP G4 is ideal for organisations and AV professionals planning a compatible Televic wireless conference system who need an access point with defined wireless, network, audio and power specifications. It may suit meeting rooms, boardrooms and conference venues where the listed unit capacity, open-microphone limit or interpretation-channel limit fits the planned configuration. The separate LAN and Plixus interfaces, balanced analog connections and multiple listed mounting types also give integrators useful details to check against a system design.

It is best suited to buyers prepared to confirm the complete equipment chain, especially wireless compatibility, the Dante implementation, the role of each Ethernet interface and the required PoE+ source. It should not be selected on the assumption that it is a general-purpose internet router or that every listed maximum can be reached simultaneously. Buyers who need a particular recording workflow, network-security configuration or mounting accessory should verify those requirements with BME before ordering.

✅ Why Choose the Televic CONFIDEA WAP G4 Wireless Access Point with Dante?

The Televic CONFIDEA WAP G4 provides a detailed set of specifications to assess when planning a wireless conference installation. Its Wi-Fi 5 standard, 2.4 GHz and 5 GHz bands, five antennas and stated 40 m range give buyers useful starting points for wireless planning. The listed limits of 128 units, eight open microphones and eight interpretation channels can also help frame a capacity discussion, although the supplied details do not establish that all three maximums are available at once.

The unit’s wired and audio specifications add further points for system matching. LAN and Plixus are listed as separate 100 Mbps Ethernet interfaces, and the balanced audio input and output use 3-pin Phoenix mini combicon connectors. PoE+ 802.3at Type 2 PD input, 15 W typical consumption and 24 W maximum consumption are relevant when checking the proposed power source. The listed MP3 recording rates, USB 2.0 interface and 4 GB internal storage may also be useful if recording is part of the planned workflow.

The product title includes Dante, but the supplied details do not describe Dante-specific ports, channel counts or network requirements. That should be confirmed rather than assumed. If the system, capacity, interfaces and power plan match your needs, the WAP G4 is a product worth evaluating with the complete Televic setup. Confirm exact compatibility and package contents before making the purchase decision.

✅ Why Buy This Product from BME?

For buyers in Bangladesh, BME is a place to enquire about the Televic CONFIDEA WAP G4 and confirm current purchase details. No price or availability is confirmed in this product copy, so contact BME for information that applies to your specific order. Confirm any delivery or collection arrangements directly with BME rather than assuming they are available.

Use your enquiry to check that the exact WAP G4 variant is suitable for your Televic system and to clarify how the Dante feature is implemented. It is also worth confirming the required PoE+ source, the role of the LAN and Plixus interfaces, the supported mounting arrangement and whether any mounting hardware is included. If your plan depends on a particular recording format or security configuration, ask BME to verify the requirements against your intended setup.

The supplied information lists a three-year brand warranty. Confirm the warranty issuer, local eligibility, coverage and terms with BME before purchase. These checks help you compare the unit with your existing equipment and avoid relying on assumptions about system compatibility, accessories or services. Contact BME with your requirements so you can make an informed decision about the exact product offered.

✅ Buying Guide

• Confirm System Compatibility: Check that the WAP G4 works with the exact Televic conference equipment and system version you plan to use.
• Verify Dante Details: Ask which interface provides Dante, what functions are supported and whether further configuration or equipment is required.
• Check the Capacity Plan: Treat the 128-unit, eight-open-microphone and eight-interpretation-channel figures as separate limits; confirm how they apply together.
• Select a Suitable Power Source: The WAP is listed as an 802.3at Type 2 PD with up to 24 W consumption. Do not mistake it for a PoE-output switch.
• Keep Interfaces Distinct: Confirm the purpose of the 100 Mbps LAN and Plixus connections before cabling.
• Respect Cable Specifications: Shielded cable above Cat5e is specified, with separate maximum lengths of 100 m for LAN and 80 m for Plixus.
• Plan Wireless Coverage: The listed 40 m range is not a guarantee for every building; consider walls, interference and mounting position.
• Check Audio Compatibility: Match the balanced Phoenix connectors, nominal and maximum levels, and receiving equipment before wiring.
• Review Recording Requirements: Confirm the supported MP3 settings, NTFS requirement and 500 GB maximum storage specification for your workflow.
• Confirm Package Contents and Terms: Ask BME about mounting hardware, included accessories and the applicable warranty terms.

✅ Customers Ask About / Frequently Asked Questions

Q: What is the Televic CONFIDEA WAP G4 price in Bangladesh?
A: Contact BME for the current price and purchase terms for your order.

Q: What is the CONFIDEA WAP G4 used for?
A: It is described as a wireless access point for a Televic conference-system setup. Confirm compatibility with your system before buying.

Q: What Wi-Fi standard and bands are listed?
A: The specifications list Wi-Fi 5 (IEEE 802.11ac) on 2.4 GHz and 5 GHz bands.

Q: How many units, open microphones and interpretation channels are listed?
A: The supplied figures are up to 128 units, eight open microphones and eight interpretation channels. Ask how these limits apply to your system configuration.

Q: Does this model support Dante?
A: Its title identifies it as “with Dante,” but the supplied details do not specify Dante ports, channel counts or network requirements. Confirm the exact implementation with BME.

Q: What power does it require?
A: It is listed as a PoE+ 802.3at Type 2 powered device, with 15 W typical and 24 W maximum consumption.

Q: Does it provide PoE output to other devices?
A: The supplied power specification identifies the WAP as a powered device; it does not confirm PoE output. Verify the role of the Plixus interface before connecting powered equipment.

Q: What is the stated wireless range?
A: The listed range is 40 m. Actual coverage depends on the site and installation conditions.

Q: What audio connections are specified?
A: Balanced input and output are listed, each with a 3-pin Phoenix mini combicon connector.

Q: What recording and storage details are supplied?
A: MP3 rates of 64, 128, 196 and 256 kbps are listed, along with a USB 2.0 NTFS interface, a 500 GB maximum and 4 GB internal storage.

Q: What mounting options are listed?
A: Wall, ceiling, electrical box and microphone stand are listed. Confirm which mounting hardware is included.

Q: What warranty is listed?
A: The supplied information lists a three-year brand warranty. Confirm its issuer, coverage and local terms with BME.

✅ Why Buy This Product

The Televic CONFIDEA WAP G4 is worth considering when you need a wireless access point for a compatible conference-system installation and want defined specifications for Wi-Fi, Ethernet, PoE+ power and balanced audio connections. Its listed conference capacity, mounting options and recording details can also help you assess whether it fits your venue and workflow.

The best purchase decision depends on confirming the exact Televic system compatibility and the details that are not fully described in the supplied specifications—particularly Dante implementation, the role of each interface, simultaneous capacity and included mounting hardware. Check the power source and cable plan before installation, and confirm the locally applicable warranty terms. For product information and ordering enquiries, contact BME with your system requirements and discuss whether the CONFIDEA WAP G4 fits your project.