Televic Wired Conference Delegate Unit With Removable Microphone

Televic Wired Conference Delegate Unit With Removable Microphone in Bangladesh

The Televic Wired Conference Delegate Unit With Removable Microphone is a tabletop participant unit for a compatible wired conference system. Its supplied specifications list 16-bit digital audio, a headphone output, speaker specifications and power over Cat5 cable. These details make it a product to assess when planning participant positions around a conference table. The information provided does not include a model number or identify the central unit it works with, so compatibility should be confirmed before purchase.

A delegate unit is typically considered as one part of a larger conference setup, rather than as an independent sound system. The product details provided do not explain how participants request or receive speaking time, whether the unit has voting or identification functions, or how it interacts with a chairperson unit. Those functions should not be assumed from the word “delegate.” Ask which features are supported by the exact unit and the central system you plan to use.

The product title describes the unit as having a removable microphone. The supplied specifications do not identify the microphone model, capsule type, pickup pattern, connector or package contents. If your setup depends on a specific microphone, ask BME to confirm which microphone is compatible and whether it is included with the unit being offered. Do not assume that the microphone can be exchanged for any other microphone or that the unit supports a particular microphone control or function unless confirmed.

Removability may be useful in a tabletop system where microphone placement, storage or replacement matters. However, the details do not explain how the microphone attaches, whether it has a locking mechanism, or how it is removed. Before designing the table layout, confirm its fitting and the clearance needed around the unit. Also check whether a microphone or other accessories are included in the package, especially if you are comparing this product with another conference unit.

The unit is described as wired, with a power supply specification of “48 DC, over Cat5 cable.” The information does not include the letter “V” after 48, so confirm the full voltage notation with BME or the product documentation. Although Cat5 is specified, the details do not state whether the cable carries only power or also system signals, what connector is used, or the supported cable length. Do not assume the connection is standard Ethernet or PoE simply because Cat5 cable is mentioned.

Compatibility with the central control equipment is particularly important. The supplied details do not name a controller, identify a system bus, list supported Televic product families or provide a wiring diagram. Confirm that the exact delegate unit and its removable microphone work with your intended central unit. If you already have a conference system, check the model number and connection requirements of its controller before adding units. A matching brand name alone does not establish compatibility.

The unit’s dimensions are given as 211.4 × 136 × 48.2 mm, and its weight is 760 g. These figures can help with tabletop spacing and transport planning. Packed dimensions are listed as 250 × 150 × 90 mm, with a packed weight of 975 g. The product is made from PC/ABS and Zamak and is specified in black. No information was supplied about mounting hardware or a method for fixing it to a table, so verify these details if the installation requires a fixed attachment.

The listed audio quality is 16-bit digital, with a frequency response of 25 Hz–15,000 Hz (±3 dB). These are product specifications that can help with a preliminary comparison. They do not, by themselves, establish microphone performance, sound quality in a particular room or the functions available through the wider conference system. No microphone sensitivity, signal-to-noise figure, total harmonic distortion or audio-processing details were provided. Request further specifications if you need to compare these performance measures.

A speaker is specified with a rated power of 4 W and mean sound-pressure level of 80 dB SPL at 1 m. These figures provide reference points for system planning, but the supplied information does not explain the measurement conditions or the way speaker audio is controlled or routed. They should not be treated as a guarantee of a particular listening level throughout a meeting room. If the speaker needs to serve a particular room layout or listening position, confirm the intended use and test the complete system in the space.

The headphone section lists an impedance range of 16–150 Ω and a maximum output of 70 mW at 32 Ω. These figures can help you check whether intended headphones are within the listed impedance range and compare their requirements with the unit’s output specification. The connector type, volume control, number of headphone sockets and headphone audio routing were not supplied. Confirm those details if users need a particular connector or individual listening arrangement. No headphones are listed as included.

The power consumption is specified as 2 W. This is a useful figure for system planning, but the available information does not state whether it is a typical, maximum or measured value under a particular operating condition. Do not use this figure to infer the capacity of the central unit or the total number of delegate units a system can support. Confirm the controller’s power budget and the permitted system configuration with the manufacturer or supplier before estimating how many units can be connected.

The stated operating temperature range is 5–50°C. The environmental entry also contains the text “Humidity: Protection class EP10 Com-pliant to IEC 60069_2.14.” As supplied, this wording is unclear: it does not give a humidity range in a recognisable format, and it should not be treated as an IP rating or a confirmed protection level. Ask BME or Televic to clarify the intended environmental specification if the room conditions are relevant. No separate storage-temperature range was supplied.

In practical terms, this unit may be considered for meeting tables, boardrooms, training spaces and other settings that use a compatible wired conference system. The table layout should allow participants to reach the microphone comfortably, connect the required cable and use the audio features provided by the complete system. These are potential applications, not confirmation of specific functions such as voting, agenda display, participant identification or priority control. Confirm the features of the exact model before planning the meeting workflow around them.

A conference unit’s suitability depends on more than its physical dimensions and basic audio figures. Check how the system handles speaking requests, how many units the central equipment supports, what cables are required and how power is distributed. None of those system limits or operating details were supplied here. In particular, do not assume that the mention of Cat5 establishes the maximum run length or permits use of any existing network cable. Follow the exact installation instructions for the selected system.

Before installation, check whether the cable route is practical at each participant position, whether the connector is accessible and whether the unit can be placed without obstructing papers or other equipment. Confirm the exact cable specification and the distance limit with the supplier. If a unit or microphone needs to be moved or removed regularly, ask how its connection should be handled and whether any storage or protective accessories are recommended. No removal procedure or accessory details were provided.

The Televic delegate unit may suit buyers who need a participant position in a compatible wired meeting setup and want to check a removable-microphone format, headphone output and listed speaker specifications. To make an informed decision, confirm the model number, microphone details, controller compatibility, cabling, connector types and package contents with BME. The supplied technical information offers useful initial points, but it does not define all the operational and installation requirements of the complete conference system.

✅ Key Features

• Wired Delegate Format: Provides a tabletop participant unit to assess for a compatible wired conference system.
• Removable Microphone Description: The product title identifies a removable microphone; confirm its model, connection and package inclusion.
• 16-Bit Digital Audio: Gives a stated digital audio specification for system planning.
• Published Frequency Response: The listed response is 25 Hz–15,000 Hz (±3 dB).
• Headphone Output Specification: The listed load range is 16–150 Ω, with maximum output of 70 mW at 32 Ω.
• Specified Speaker Figures: The speaker is listed at 4 W rated power and 80 dB SPL mean level at 1 m.
• Cat5 Cable Power: Power is specified as “48 DC” over Cat5 cable; confirm the full voltage notation and connection requirements.
• Compact Tabletop Dimensions: The unit measures 211.4 × 136 × 48.2 mm and weighs 760 g.
• PC/ABS and Zamak Construction: These materials are specified for the black unit.
• Low Listed Power Consumption: Power consumption is specified as 2 W.

✅ Usage / Applications

• Conference Table Positions: Consider for participant positions in a compatible wired conference setup.
• Boardrooms: Assess for a planned boardroom system after checking the central unit and cable requirements.
• Meeting Rooms: Use as part of a suitable discussion system where a wired tabletop unit fits the layout.
• Training Rooms: Consider for a participant position in a structured training-room conference installation.
• Seminar Spaces: Evaluate where the seating plan and system wiring support fixed delegate positions.
• Headphone Listening: Plan headphone use after checking connector type and compatibility with the listed impedance range.
• System Upgrades: Check compatibility before adding the unit to an existing Televic conference system.
• Removable-Microphone Setups: Consider where a removable microphone format is required, once the exact microphone is confirmed.
• Tabletop Discussion Systems: Use within a complete compatible system; the unit is not specified as a standalone controller.

✅ Benefits of This Product?

• Dedicated Participant Position: Provides a defined tabletop unit for a participant in a compatible wired conference system.
• Flexible Microphone Planning: The product title describes a removable microphone, subject to confirming its exact model and fitting.
• Clear Audio References: The stated frequency response and digital audio format help with preliminary product comparisons.
• Headphone Compatibility Check: The listed impedance range provides a practical starting point when selecting headphones.
• Useful Physical Measurements: Dimensions and weight help with table-spacing and equipment-planning decisions.
• Defined Speaker Specifications: The supplied speaker figures offer reference points for system enquiries.
• Power Planning Information: The listed 2 W consumption and Cat5 power note help frame compatibility questions.
• Better Upgrade Decisions: Checking the model and controller first helps avoid relying on brand name alone.

✅ Ideal For

The Televic Wired Conference Delegate Unit With Removable Microphone is ideal for buyers planning a participant position within a compatible wired conference system. Its tabletop dimensions, 16-bit digital audio specification, headphone output figures and listed speaker details may be relevant to boardrooms, meeting rooms or training spaces. The product title describes a removable microphone, which may suit a setup where the microphone needs to detach, but the exact microphone model and attachment details should be confirmed.

It is best suited to AV planners and organisations that can verify the unit’s model, central-system compatibility, Cat5 cable requirements and power connection before purchase. The specification states “48 DC” over Cat5 cable; confirm the intended voltage notation and do not assume standard PoE or Ethernet behaviour. The unit is not described as a standalone conference controller. Buyers who need particular functions—such as voting, participant identification or microphone priority—should verify that the exact unit and complete system provide them.

✅ Why Choose the Televic Wired Conference Delegate Unit With Removable Microphone?

This Televic delegate unit is worth considering when your conference-table plan calls for a wired participant position and a removable-microphone format. Its stated dimensions and weight provide practical information for assessing table space, while the PC/ABS and Zamak construction and black finish help identify the supplied physical configuration. The supplied description also gives specific audio references: 16-bit digital audio, a frequency response of 25 Hz–15,000 Hz (±3 dB), a headphone load range of 16–150 Ω and speaker figures of 4 W rated power and 80 dB SPL mean level at 1 m.

These details can help narrow down whether the unit merits further evaluation, but they do not replace a compatibility check. No model number, central-unit compatibility list, wiring topology or microphone specifications were provided. Power is listed as “48 DC” over Cat5 cable, so clarify the full voltage notation, connector, cable requirements and maximum cable run before installation. Do not assume that Cat5 means the unit uses standard Ethernet or PoE.

If the unit matches your conference system and the microphone and connections meet your needs, its listed dimensions, audio specifications and removable-microphone description provide useful points for project planning. Confirm the package contents and unsupported operational details before ordering so that the chosen unit fits the actual meeting-room setup.

✅ Why Buy This Product from BME?

For buyers in Bangladesh, BME is a place to enquire about this Televic conference delegate unit and confirm current product and purchase details. No current price or availability is stated here, so contact BME for a quote and terms applicable to your order. Confirm any delivery or collection arrangements directly with BME rather than assuming they are available.

Since no model number was supplied, ask BME to identify the exact model being offered. It is also sensible to confirm which removable microphone is compatible and whether it is included, along with the central unit required to operate the delegate unit. Ask for clarification of the “48 DC” power notation, Cat5 cabling, connector type and any cable-length limits relevant to your installation.

Warranty terms were not included in the supplied specifications. Confirm whether a warranty applies to the exact unit and check its issuer, coverage and conditions before ordering. You can also ask about package contents and any required accessories. These checks help you compare the product against your existing conference equipment without assuming unlisted features or services. Contact BME through https://bme.com.bd/ for current information about the product offered.

✅ Buying Guide

• Confirm the Exact Model: No model number was supplied; ask BME to identify the unit being offered.
• Check Central-Unit Compatibility: Verify that the delegate unit works with your specific conference controller.
• Clarify the Microphone: Ask for the microphone model, attachment type and package inclusion.
• Confirm Power Details: The listing says “48 DC” over Cat5 cable; verify the full voltage notation and connection requirements.
• Check the Cable Run: Confirm the required cable type, connectors and maximum permitted length; do not infer these from Cat5 alone.
• Match Headphones: Check the intended headphones against the specified 16–150 Ω load range and confirm the socket type.
• Review System Functions: Verify any needed speaking, participant or meeting-management functions with the complete system.
• Clarify the Environment Entry: Ask what “Protection class EP10 Com-pliant to IEC 60069_2.14” means; it is not stated here as an IP rating.
• Confirm Package and Terms: Ask about included accessories and any applicable warranty, delivery or collection terms.

✅ Customers Ask About / Frequently Asked Questions

Q: What is the price of this Televic delegate unit in Bangladesh?
A: Contact BME for the current quote and purchase terms.

Q: What is the product’s model number?
A: No model number was provided in the supplied product information. Ask BME to confirm the exact model.

Q: Does it include a removable microphone?
A: The product title describes it as a unit with a removable microphone. The microphone model and exact package contents were not supplied, so confirm them with BME.

Q: Which central unit is compatible with it?
A: Compatibility was not specified. Check the exact delegate-unit model against your Televic central controller before ordering.

Q: What does “48 DC over Cat5 cable” mean?
A: That is the power description as supplied. The voltage notation and cable connection details need clarification; do not assume standard PoE.

Q: What is its audio specification?
A: Audio quality is listed as 16-bit digital, with a frequency response of 25 Hz–15,000 Hz (±3 dB).

Q: What headphones can it use?
A: The listed headphone impedance is 16–150 Ω, with maximum output of 70 mW at 32 Ω. The headphone connector type was not supplied.

Q: What speaker specifications are listed?
A: The supplied details list 4 W rated power and a mean sound-pressure level of 80 dB SPL at 1 m.

Q: What are its dimensions and weight?
A: The unit measures 211.4 × 136 × 48.2 mm and weighs 760 g, according to the supplied specifications.

Q: Is the environmental protection rating clear?
A: No. The supplied entry “Protection class EP10 Com-pliant to IEC 60069_2.14” is ambiguous and should be clarified. It is not presented here as an IP rating.

Q: Does the information include a warranty?
A: No warranty detail was supplied. Ask BME about any applicable warranty and its terms.

✅ Why Buy This Product

Consider this Televic delegate unit if you need a wired participant position for a compatible conference system and the removable-microphone format suits your setup. Its stated size and weight, digital audio specification, headphone figures and speaker data provide useful starting points for assessing the unit against your meeting-room requirements.

Before purchasing, confirm the model number, compatible central controller, exact microphone and package contents. Clarify the “48 DC” notation, Cat5 connection and cable limits with BME, and verify the environmental entry if it matters to your installation. The supplied information does not confirm specific conference-control functions or warranty terms, so check those details directly. If the confirmed specifications match your system, contact BME to enquire about this unit.